.templates available for download

Created by Matheus Gabriel Barbosa Rocha dos Santos, Modified on Thu, 3 Apr at 3:45 PM by Matheus Gabriel Barbosa Rocha dos Santos

The SD line (SD+ and SDG) of devices includes the interpretation of IEDs that come into its input.

Information!

NOTE: The .template file allow the addition of a new IED in the input and output of the DNP3 and Modbus protocols, as covered in our guide Inserting a New IED.

The files to be imported contain the points in the Modbus and DNP protocols, both for input and output.

Login

Enter the IP configured on your device in your browser's search bar. The default IED IP is: 192.168.10.87 or 192.168.1.87.

Aviso !

NOTE: If you are trying to connect using the default IP, make sure your machine is within the same network range as the SD+.

Click the		button to gain access to the additional settings of the SD+ and
Log in to the system with the desired user.

Information!

Default user: default
Default password: Default123

NOTE: If the system version is lower than 2.3.1, use default as the default username and password.

Go to the "Application" page.

Information!

NOTE: Some system interfaces may vary depending on the system version installed on the device. However, the core steps remain the same.

On the Application page, you can Clone the configuration file (.back) from the current runtime area of the SD+ (left side) to the application configuration area by clicking the clone button. Once cloned, you can edit the configuration area as needed.

Importing the .template File

To add a new IED, simply fill in the field with the equipment name and select the import file, as shown in the image below:

Select the desired .template file and click Open.

After the success notification for the file import, you can proceed with inserting the IED into the input and output by following our guide Inserting a New IED.

Warning!

If you are using an SDG, use the files with the "SDG_" prefix. If you are using an SD+, use the file without a prefix.

If you encounter any issues or have difficulty with the procedure, do not hesitate to contact us!

Contacts:  
Telefone: +55 (11) 2410 – 1190 — Ramal: 425
Celular: +55 (11) 97225 – 8683 - WhatsApp
E-mail: sac@treetech.com.br
Support Portal

Attachments (15)