In this article, you will learn how to download the AVR LOG step by step. To conduct this procedure, it will be necessary to use the software attached at the end of this article and carry out the steps below:
1. Unzip the file;
2. Click on the file LOG_AVR_V122 to install the software;
- Click Next until the installation is complete. It is necessary to install the file in the Program Files (x86) folder
3. Once installed, enter the LOG AVR V1.22 application;
4. Configure the communication port.
- To access this information, enter the Device Manager Application. There it is possible to check which devices are plugged into the computer.
- When you open this app, expand the part "Ports (COM and LPT)" and identify the corresponding connection.
- It is also necessary to check the address of the AVR.
- To access this value on the device, go to Menu → Configuration → Address.
5. The IED must be in Modbus protocol to download the LOG.
- To make this change go to Menu → Configuration → Protocol.
6. Fill in the information obtained in the previous steps in the places indicated by arrows.
7. After that, select the View LOG button.
8. Then select Generate Bank.
9. After selecting Generate Bank, a message box will appear informing the location of the folder in which the file is located.
10. A spreadsheet with the equipment's LOG data will be located in the indicated place.
The download and access to the AVR LOG data have been completed.
Should there be any problems or have any difficulties with downloading the LOG data, please do not hesitate to contact us!
Contacts:
Telephone: +55 (11) 2410 – 1190 — Ext. 425
Cellular: +55 (11) 97225 – 8683 - WhatsApp
E-mail: sac@treetech.com.br
Customer Service Portal
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article