DI equipment parameterization guide

Created by Stephanye Martins, Modified on Wed, 4 Oct, 2023 at 3:45 PM by Patrícia Siqueira

The digital indicator - DI is an electronic microprocessed equipment for remote supervision of distinct transformer's and power reactor's variables. It is possible to measure up to 8 variables. For example, a DI can indicate different variables of one only transformer: the insulating oil's temperature and also the temperatures of 3 windings, oil's moisture, oil's water content. Otherwise, it can also indicate temperatures of phases A, B, C and spare of a single-phase bank of transformers.

The 8 indications are differentially signed by LEDs disposed in DI's frontal panel.  

The input variables are individually configured by the user through the insertion of the scale measurement limits. The alarm limit for each variable is programmable in two levels. In the case of one monitored variable exceeds its limit, the correspondent LED starts to blink and a relay can be configured to inform the alarm to a remote system.

Parameterization:

For the proper operation of the equipment, some parameters must be configured. Below are the main points to be checked:

  • Configuration of inputs:
Menu:
Parameter:
Description:
Range values:
CONF
NIPT
Number of inputs
1 to 8
NIPT
(1 to 8 or ALL)
ANIR
Analog input range
0 to 8
EDSC
Input's end scale

BGSC
Input's begin scale

DEC
Decimal places

  • Alarms:
Menu:
Parameter:
Description:
Range values:
ADVN
ALRM
ALM1
Alarm 1 value (Relay 1)

ALM2
Alarm 2 value (Relay 2)

  • Serial communication:
Menu:
Parameter:
Description:
Range values:
ADVN
CONF
CMMN
Common terminal
Positive or Negative
ANOV
Analog output variable
1, 2, 3, 4, 5, 6, 7, 8, Min or Max Value.
ANOR
Analog output range
0 to 8
ADDR
Address
1 to 31
BDR
Baud Rate
9600, 19200 or 38400
PROTProtocol (optional nº1)MDB or DNP

If you have any problems or difficulties with the procedure, please do not hesitate to contact us!

Contacts:  
Telephone: +55 (11) 2410 – 1190 — Ext. 425
Cellular: +55 (11) 97225 – 8683 - 
WhatsApp
E-mail: sac@treetech.com.br
Customer Service Portal





Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article