DNP V3.0
DEVICE PROFILE DOCUMENT
Vendor Name: Treetech Sistemas Digitais
Device Name: DI - Digital Indicator
Highest DNP Level Supported:Device Function:
For Requests: Level 1( ) Master
For Responses: ______(X) Remote
Notable Objects, functions, and/or qualifiers supported in addition to highest DNP Levels Supported:
Reads of Binary Inputs (Object 01, Variation 01, Qualifier 00, 01 and 06)
Reads of 16-bit Analog Inputs (Object 30, Variation 04 Qualifier 00, 01 and 06)
GENERAL INFORMATION:
Maximum Data Link Frame Size (octets):Maximum Application Frame Size (octets):
Transmitted: 292Transmitted: 500
Received: (must be 292)Received: 200
Maximum Data Link Re-tries:Maximum Application Layer Re-tries:
(X) None(X) None
( ) Fixed at ___( ) Configurable, range ___ to ___
( ) Configurable, range 0 to 255(Fixed is not permitted)
Requires Data Link Layer Confirmation:
(X) Never
( ) Always
( ) Sometimes If Sometimes, when? ______________________________
( ) Configurable as: _______________________________________________
Requires Application Layer Confirmation:
( ) Never
( ) Always (Not recommended)
(X) When reporting Event Data (Slave devices only)
( )  When sending mult-fragment responses (Slave devices only)
( ) Sometimes: If ‘Sometimes’, when? __________________________________________
( ) Configurable: If ‘Configurable’, how? _______________________________________
Timeouts while waiting for:
Data link confirm:                                                 (X) None( ) Fixed at ____( ) Variable*( ) Configurable*
Complete Appl. Fragment:(X) None( ) Fixed at ____( ) Variable*( ) Configurable*
Aplication Confirm:(X) None( ) Fixed at ____( ) Variable*( ) Configurable*
Complete Appl. Response:(X) None( ) Fixed at ____( ) Variable*( ) Configurable*
Others: ______________________________________________________________________
*Attach explanation if ‘Variable’ or ‘Configurable’ was checked for any timeout
Sends/Executes Control Operations:
WRITE Binary Outputs:(X) Never( ) Always( ) Sometimes*( )Configurable*
SELECT/OPERATE:(X) Never( ) Always( ) Sometimes*( )Configurable*
DIRECT OPERATE:( ) Never(X) Always( ) Sometimes*( )Configurable*
DIRECT OPERATE-No ACK:( ) Never(X) Always( ) Sometimes*( )Configurable*





Count > 1:(X) Never( ) Always( ) Sometimes*( )Configurable*
Pulse On:(X) Never( ) Always( ) Sometimes*( )Configurable*
Pulse Off:(X) Never( ) Always( ) Sometimes*( )Configurable*
Latch On:( ) Never(X) Always( ) Sometimes*( )Configurable*
Latch Off:( ) Never(X) Always( ) Sometimes*( )Configurable*





Queue:(X) Never( ) Always( ) Sometimes*( )Configurable*
Clear Queue:(X) Never( ) Always( ) Sometimes*( )Configurable*
*Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation.





FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY:
Expects Binary Input Change Events:
( ) Either time-tagged or non-time-tagged for a single event.
( ) Both time-tagged and non-time-tagged for a single event.
( ) Configurable (Attach explanation)





FILL OUT THE FOLLOWING ITEM FOR REMOTE DEVICES ONLY:
Default Status Object/Variation:Default Analog Object/Variation:
( ) No Status objects reported( ) No Analog objects reported
( ) Configurable (attach explanation)( ) Configurable (attach explanation)
( ) Default Static Object_____________( ) Default Static Object______________
( ) Default Static Variation __________( ) Default Static Variation ___________
( ) Default Event Object_____________( ) Default Event Object______________
( ) Default Event Variation __________( ) Default Event Variation ___________
(X) Point-by-point list attached(X) Point-by-point list attached
Default Counter Object/Variation:Counters Roll Over at:
(X) No Counters reported(X) No Counters reported
( ) Configurable (attach explanation)( ) Configurable (attach explanation)
( ) Default Static Object_____________( ) 16 Bits
( ) Default Static Variation __________( ) 32 Bits
( ) Default Event Object_____________( ) Other Value _________
( ) Default Event Variation __________( ) Point-by-point list attached
( ) Point-by-point list attached
Default Frozen Counter Object/Variation:Counters frozen by means of:
(X) No Frozen Counters reported(X) No Frozen Counters reported
( ) Configurable (attach explanation)( ) Remote device time based
( ) Default Static Object_____________( ) Fixed time
( ) Default Static Variation __________( ) Configurable; range _____ to _____
( ) Default Event Object_____________( ) Master Request (see implementation table)
( ) Default Event Variation __________( ) Both
( ) Point-by-point list attached
Analog Deadbands:Configuring Analog Deadbands:
( ) Fixed(X) Not Applicable
( ) Configurable: ____( ) Configuration Software
(X) Per point( ) Using Object 34 from the master station
( ) Per Analog Type( ) Both configuration software and Object 34
( ) Global
Are the updated deadband values preserved through a device reset:
(X) YES
( ) NO
The number of multiple objects allowed in a single read request message:
Number of multiple objects allowed: 3
Ability to DISABLE/ENABLE DNP database points:IIN 1-6 Device Trouble Bit:
(X) Not Applicable(X) Never used
( ) Per point( ) Reason for setting:
( ) Per object
( ) Global
Time Sync Information:
Time Sync Period:
(X) Never
( ) Fixed at ______ seconds
( ) Configurable, range ______ to _______ seconds
a) Maximum time base drift over a 10 minute interval:             _________ ms
b) Maximum Internal Time Reference Error when set via DNP: _________ ms
c) Maximum Delay Measurement error: _________ ms
d) Maximum Response time: _________ ms
e) Event data time-tag error – if different than ( c ) :
f) Binary Input Change Events __________ ms
g) Counter Change Events __________ ms
h) Frozen Counter Change Events __________ ms
i) Analog Change Events __________ ms
j) Frozen Analog Change Events      __________ ms
Sends/Executes Digital Control Operations:
SELECT/OPERATE**(X) Never( ) Always( ) Sometimes*( )Configurable*
DIRECT OPERATE**( ) Never(X) Always( ) Sometimes*( )Configurable*
DIRECT OPERATE – NO ACK**( ) Never(X) Always( ) Sometimes*( )Configurable*





Count > 1:(X) Never( ) Always( ) Sometimes*( )Configurable*
Pulse On:(X) Never( ) Always( ) Sometimes*( )Configurable*
Pulse Off:(X) Never( ) Always( ) Sometimes*( )Configurable*
Latch On:( ) Never(X) Always( ) Sometimes*( )Configurable*
Latch Off:( ) Never(X) Always( ) Sometimes*( )Configurable*
Trip/Close:(X) Never( ) Always( ) Sometimes*( )Configurable*
Raise/Lower:(X) Never( ) Always( ) Sometimes*( )Configurable*





Queue:(X) Never( ) Always( ) Sometimes*( )Configurable*
Clear Queue:(X) Never( ) Always( ) Sometimes*( )Configurable*
*Attach explanation if ‘Sometimes’ or ‘Configurable’ was checked for any operation.
**To support control operations and conform to the Subset Definitions, either ‘Always’ or ‘Configurable’ must
be selected.
Sends/Executes Analog Control Operations:
SELECT/OPERATE**(X) Never( ) Always( ) Sometimes*( )Configurable*
DIRECT OPERATE**( ) Never(X) Always( ) Sometimes*( )Configurable*
DIRECT OPERATE – NO ACK**( ) Never(X) Always( ) Sometimes*( )Configurable*





Queue:(X) Never( ) Always( ) Sometimes*( )Configurable*
Clear Queue:(X) Never( ) Always( ) Sometimes*( )Configurable*
*Attach explanation if ‘Sometimes’ or ‘Configurable’ was checked for any operation.
**To support control operations and conform to the Subset Definitions, either ‘Always’ or ‘Configurable’ must
be selected.
The maximum number of objects supported in a single control request for objects 12 and 41.
Number of objects allowed for object 12: 1
Number of objects allowed for object 41: 1
Control Points per address:Do all indices support the same control codes:
( ) Configurable(X) YES – Controls codes 3 and 4
(X) 1 control point per address( ) NO – attached points list stating configuration ability and supported control codes per point or group of points
( ) 2 control points per address
Maximum Select/Execute Delay Time:Ability for REMOTE/LOCAL control mode:
(X) Not Applicable(X) Not Applicable
( ) Fixed at _____ seconds( ) Per point
( ) Configurable, range ______ to ______ seconds( ) Per object

( ) Global
Sends Unsolicited Responses:Sends Static Data in Unsolicited Responses:
(X) Never(X) Never
( ) Configurable (attach explanation)( ) When Device Restarts
( ) Only certain objects( ) When Status Flags Change
( ) Sometimes (attach explanation)*No other options permitted.
ENABLE/DISABLE Unsolicited:Minimum number of events and/or minimum time before transmission of an unsolicited message.
(X) Not SupportedNumber of events: __________
( ) ConfigurableMinimum amount of time (msec) : ___________
( ) Function codes 20,21 supported
Assign Class Function code supported:Is the Event Buffer size configurable:
(X) NO(X) NO fixed size: _______
( ) YES( ) YES: range: __________ to __________
( ) Per ObjectConfigurable Per Class buffer:
( ) Per Point(X) NO
( ) Configurable( ) YES
Are the updated ENABLE/DISABLE unsolicited settings saved through a device reset:Are the updated Assign Class settings saved through a device reset:
( ) YES( ) YES
(X) NO(X) NO
Supports Collision Avoidance:
(X) Never
( ) Always (attach explanation)
( ) Configurable (attach explanation)
Source Address Filtering:
(X) Not Supported
( ) Configurable (attach explanation)
Supports Multi-drop communications:          (X) YES          ( ) NO
Sends Multi-Fragment Responses:              ( ) YES          (X) NO



Logo da Treetech