Device Profile

Criada por Patrícia Siqueira, Modificado em Ter, 12 Jul, 2022 na (o) 1:12 PM por Patrícia Siqueira

DNP V3.0 DEVICE PROFILE DOCUMENT
Vendor Name: Treetech Sistemas Digitais
Device Name: SDV - Smart Device para Regulação de Tensão
Highest DNP Level Supported:		Device Function:
For Requests: Level 1		( ) Master
For Responses: ______		(X) Remote
Notable Objects, functions, and/or qualifiers supported in addition to highest DNP Levels Supported:
Reads of Binary Inputs (Object 01, Variation 01, Qualifier 00, 01 and 06)
Reads of 16-bit Analog Inputs (Object 30, Variation 04 Qualifier 00, 01 and 06)
GENERAL INFORMATION:
Maximum Data Link Frame Size (octets):		Maximum Application Frame Size (octets):
Transmitted: 292		Transmitted: 800
Received: (must be 292)		Received: 50
Maximum Data Link Re-tries:		Maximum Application Layer Re-tries:
(X) None		(X) None
( ) Fixed at ___		( ) Configurable, range ___ to ___
( ) Configurable, range 0 to 255		(Fixed is not permitted)
Requires Data Link Layer Confirmation:
(X) Never
( ) Always
( ) Sometimes If Sometimes, when? ______________________________
( ) Configurable as: _______________________________________________
Requires Application Layer Confirmation:
( ) Never
( ) Always (Not recommended)
(X) When reporting Event Data (Slave devices only)
( ) When sending mult-fragment responses (Slave devices only)
( ) Sometimes: If ‘Sometimes’, when? __________________________________________
( ) Configurable: If ‘Configurable’, how? _______________________________________
Timeouts while waiting for:
Data link confirm:	(X) None	( ) Fixed at ____	( ) Variable*	( ) Configurable*
Complete Appl. Fragment:	(X) None	( ) Fixed at ____	( ) Variable*	( ) Configurable*
Aplication Confirm:	(X) None	( ) Fixed at ____	( ) Variable*	( ) Configurable*
Complete Appl. Response:	(X) None	( ) Fixed at ____	( ) Variable*	( ) Configurable*
Others: ______________________________________________________________________
*Attach explanation if ‘Variable’ or ‘Configurable’ was checked for any timeout
Sends/Executes Control Operations:
WRITE Binary Outputs:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
SELECT/OPERATE:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
DIRECT OPERATE:	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*
DIRECT OPERATE-No ACK:	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*

Count > 1:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Pulse On:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Pulse Off:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Latch On:	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*
Latch Off:	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*

Queue:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Clear Queue:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
*Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation.

FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY:
Expects Binary Input Change Events:
( ) Either time-tagged or non-time-tagged for a single event.
( ) Both time-tagged and non-time-tagged for a single event.
( ) Configurable (Attach explanation)

FILL OUT THE FOLLOWING ITEM FOR REMOTE DEVICES ONLY:
Default Status Object/Variation:		Default Analog Object/Variation:
( ) No Status objects reported		( ) No Analog objects reported
( ) Configurable (attach explanation)		( ) Configurable (attach explanation)
( ) Default Static Object__________		( ) Default Static Object______________
( ) Default Static Variation __________		( ) Default Static Variation ___________
( ) Default Event Object___________		( ) Default Event Object______________
( ) Default Event Variation __________		( ) Default Event Variation ___________
(X) Point-by-point list attached		(X) Point-by-point list attached
Default Counter Object/Variation:		Counters Roll Over at:
(X) No Counters reported		(X) No Counters reported
( ) Configurable (attach explanation)		( ) Configurable (attach explanation)
( ) Default Static Object_____________		( ) 16 Bits
( ) Default Static Variation __________		( ) 32 Bits
( ) Default Event Object_____________		( ) Other Value _________
( ) Default Event Variation __________		( ) Point-by-point list attached
( ) Point-by-point list attached
Default Frozen Counter Object/Variation:		Counters frozen by means of:
(X) No Frozen Counters reported		(X) No Frozen Counters reported
( ) Configurable (attach explanation)		( ) Remote device time based
( ) Default Static Object_____________		( ) Fixed time
( ) Default Static Variation __________		( ) Configurable; range _____ to _____
( ) Default Event Object_____________		( ) Master Request (see implementation table)
( ) Default Event Variation __________		( ) Both
( ) Point-by-point list attached
Analog Deadbands:		Configuring Analog Deadbands:
( ) Fixed		(X) Not Applicable
( ) Configurable: ____		( ) Configuration Software
(X) Per point		( ) Using Object 34 from the master station
( ) Per Analog Type		( ) Both configuration software and Object 34
( ) Global
Are the updated deadband values preserved through a device reset:
(X) YES
( ) NO
The number of multiple objects allowed in a single read request message:
Number of multiple objects allowed: 3
Ability to DISABLE/ENABLE DNP database points:		IIN 1-6 Device Trouble Bit:
(X) Not Applicable		(X) Never used
( ) Per point		( ) Reason for setting:
( ) Per object
( ) Global
Time Sync Information:
Time Sync Period:
(X) Never
( ) Fixed at ______ seconds
( ) Configurable, range ______ to _______ seconds
a) Maximum time base drift over a 10 minute interval: _________ ms
b) Maximum Internal Time Reference Error when set via DNP: _________ ms
c) Maximum Delay Measurement error: _________ ms
d) Maximum Response time: _________ ms
e) Event data time-tag error – if different than ( c ) :
f) Binary Input Change Events __________ ms
g) Counter Change Events __________ ms
h) Frozen Counter Change Events __________ ms
i) Analog Change Events __________ ms
j) Frozen Analog Change Events __________ ms
Sends/Executes Digital Control Operations:
SELECT/OPERATE**	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
DIRECT OPERATE**	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*
DIRECT OPERATE – NO ACK**	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*

Count > 1:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Pulse On:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Pulse Off:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Latch On:	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*
Latch Off:	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*
Trip/Close:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Raise/Lower:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*

Queue:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Clear Queue:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
*Attach explanation if ‘Sometimes’ or ‘Configurable’ was checked for any operation.
**To support control operations and conform to the Subset Definitions, either ‘Always’ or ‘Configurable’ must
be selected.
Sends/Executes Analog Control Operations:
SELECT/OPERATE**	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
DIRECT OPERATE**	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*
DIRECT OPERATE – NO ACK**	( ) Never	(X) Always	( ) Sometimes*	( )Configurable*

Queue:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
Clear Queue:	(X) Never	( ) Always	( ) Sometimes*	( )Configurable*
*Attach explanation if ‘Sometimes’ or ‘Configurable’ was checked for any operation.
**To support control operations and conform to the Subset Definitions, either ‘Always’ or ‘Configurable’ must be selected.
The maximum number of objects supported in a single control request for objects 12 and 41.
Number of objects allowed for object 12: 1
Number of objects allowed for object 41: 1
Control Points per address:		Do all indices support the same control codes:
( ) Configurable		(X) YES – Controls codes 3 and 4
(X) 1 control point per address		( ) NO – attached points list stating configuration ability and supported control codes per point or group of points
( ) 2 control points per address
Maximum Select/Execute Delay Time:		Ability for REMOTE/LOCAL control mode:
(X) Not Applicable		(X) Not Applicable
( ) Fixed at _____ seconds		( ) Per point
( ) Configurable, range ______ to ______ seconds		( ) Per object
		( ) Global
Sends Unsolicited Responses:		Sends Static Data in Unsolicited Responses:
(X) Never		(X) Never
( ) Configurable (attach explanation)		( ) When Device Restarts
( ) Only certain objects		( ) When Status Flags Change
( ) Sometimes (attach explanation)		*No other options permitted.
ENABLE/DISABLE Unsolicited:		Minimum number of events and/or minimum time before transmission of an unsolicited message.
(X) Not Supported		Number of events: __________
( ) Configurable		Minimum amount of time (msec) : ___________
( ) Function codes 20,21 supported
Assign Class Function code supported:		Is the Event Buffer size configurable:
(X) NO		(X) NO fixed size: _______
( ) YES		( ) YES: range: __________ to __________
( ) Per Object		Configurable Per Class buffer:
( ) Per Point		(X) NO
( ) Configurable		( ) YES
Are the updated ENABLE/DISABLE unsolicited settings saved through a device reset:		Are the updated Assign Class settings saved through a device reset:
( ) YES		( ) YES
(X) NO		(X) NO
Supports Collision Avoidance:
(X) Never
( ) Always (attach explanation)
( ) Configurable (attach explanation)
Source Address Filtering:
(X) Not Supported
(X) Configurable (attach explanation)
Supports Multi-drop communications: (X) YES ( ) NO
Sends Multi-Fragment Responses: ( ) YES (X) NO

Logo da Treetech no final da página